Controllers are designed for automatic control of lawn and trees irrigation. The controller determines the time of opening the valve, the duration of its operation. It is a basic element of automatic irrigation management system. Remote control selected with the necessary set of functions and programs depending on the irrigated area. Requirements during remote selecting depending on irrigated territory. The controller stores the data on irrigation schedules, enable or disable watering at specified time. It simplifies the use of the system greatly.
All intellectual power of your irrigation system Weathermatic places under the elegant body of WM controller. Simple in setting up, these controllers allow to achieve the maximum flexibility and better management of automatic irrigation during its programming. Remote control via cable AC voltage 24V opens and closes the magnetic valve system, which provide watering of irrigated areas. When it receives the signal it open valves and water flows in the nozzle. If you disable the signal the tray of water stops before the next cycle of irrigation. Do not be surprised if you find that the controller WM is the most simple electrical gadget in your house. You program the controller at the beginning of the summer season and do not need to touch it during all the season, even if there was a power outage. Built-in rechargeable battery will take care of maintaining the program.
Using the controller WM, you will create the beautiful lawn and landscape in the garden, saving significantly on the water consumption. Independent programmes makes planning of individual irrigation for the lawn, trees, flowerbeds, gardens and shrubs. Calendar, interval (watering every 2 days, every 3 days and so on) mode, watering on odd or even dates. "Seasonal Settings" gives an opportunity to save features of the watering program, reducing or enlarging it without of necessity to re-program it.
The last range of Smart Line controllers sets a new industry standard in the field of irrigation.

